A New Retracking Technique for Brown Peaky Altimetric Waveforms     

Fukai Peng 《Marine Geodesy》2018,41(2):99-125

A new Brown-Peaky (BP) retracker has been developed for peaky waveforms that usually appear within ～10 km to the coastline. The main feature of the BP is that it fits peaky waveforms using the Brown model without introducing a peak function. The retracking strategy first detects the peak location and width of a waveform using an adaptive peak detection method, and then estimates retracking parameters using a weighted least squares (WLS) estimator. The WLS assigns a downsized weight to corrupted waveform gates, but an equal weight to other normal waveform gates. The BP retracker has been applied to 4-year Jason-1 waveform (2002–2006) in two Australian coastal zones. The results retracked by BP, MLE4 and ALES retrackers have been validated against tide-gauge observations located at Burnie, Lorne and Broome. The comparison results show that three retrackers have similar performance over open oceans with the correlation coefficient (～0.7) and RMSE (～13 cm) between altimetric and tide-gauge sea levels for distance >7 km offshore. The main improvement of BP retracker occurs for distance ≤7 km to the coastline, where validation results indicate that data retracked by BP are more accurate (15–21 cm) than those by ALES (16–24 cm) and MLE4 (19–37 cm).  相似文献   

高精度直升机机载LiDAR在高速公路改扩建勘测中的应用可行性研究          下载免费PDF全文

郑伟安 《山东国土资源》2018,34(8)

机载LiDAR在公路勘测方面的用途日益广泛。该文对直升机机载LiDAR在高速公路改扩建中的应用技术路线可行性进行了研究论证,从地面控制测量、点云数据获取、点云数据处理、成果应用等多个方面进行了阐述,通过分析LiDAR点云数据在5种不同地面控制点布设方案校正下的点云数据精度,论证了利用地面控制点对直升机机载LiDAR点云数据进行平面和高程校正的可行性。  相似文献   

Lidar-aided analysis of boreal forest backscatter at Ku band     

《International Journal of Applied Earth Observation and Geoinformation》2020

This paper analyzes the backscatter of the microwave signal in a boreal forest environment based on a Ku -band airborne Frequency-Modulated Continuous Waveform (FMCW) profiling radar—Tomoradar. We selected a half-managed boreal forest in the southern part of Finland for a field test. By decomposing the waveform collected by the Tomoradar, the vertical canopy structure was achieved. Based on the amplitude of the waveform, the Backscattered Energy Ratio of Canopy-to-Total (BERCT) was calculated. Meanwhile, the canopy fraction was derived from the corresponding point cloud recorded by a Velodyne VLP-16 LiDAR mounted on the same platform. Lidar-derived canopy fraction was obtained by counting the number of the first/ the strongest returns versus the total amount of returns. Qualitative and quantitative analysis of radar-derived BERCT on lidar-derived canopy fraction and canopy height are investigated. A fitted model is derived to describe the Ku-band microwave backscatter in the boreal forest to numerically analyze the proportion contributed by four factors: lidar-derived canopy fraction, radar-derived canopy height, the radar-derived distance between trees and radar sensor and other factors, from co-polarization Tomoradar measurements. The Root Mean Squared Error (RMSE) of the proposed model was 0.0958, and the coefficient of determination R2 was 0.912. The fitted model reveals that the correlation coefficient between radar-derived BERCT and lidar-derived canopy fraction is 0.84, which illustrates that lidar surface reflection explains the majority of the profiling /waveform radar response. Thus, vertical canopy structure derived from lidar can be used for the benefit of radar analysis.  相似文献   

基于LiDAR的农田地形环境三维重建方法     

郎朗  冯晓蓉  刘浪 《测绘通报》2020,(2):55-60

为克服传统农田土地平整测量方法耗时费力的特点，提出采用LiDAR技术对农田地形进行重建的探索性研究。通过HDL-32E型激光雷达等搭建了系统的硬件平台，应用C++语言编写了系统数据的采集程序；在此基础上对激光雷达所采集数据进行了标定，研究了农田地形重建系统中不同坐标系的转换方法；同时基于最小值去噪法设计了更适用于农田地形点云去噪的均值限差去噪法。通过对比在农田起伏较大区域不同坡度范围内RTK与激光雷达所测单元个数，对系统精度进行了评价；最后实现了车载农田地形重建系统的界面显示、应用与精度评估。结果表明，在10°~15°、25°~30°大坡度范围内激光雷达所获农田地形更为丰富，精度更高。该方法重建的农田地形模型点云数据和原始农田地形点云数据投影面积逼近度可达93%，验证了本文研究方法应用于农田地形环境重建的可行性，同时为今后的土地精细平整工作提供了理论参考与依据。  相似文献   

Moving from plot-based to hillslope-scale assessments of savanna vegetation structure with long-range terrestrial laser scanning (LR-TLS)     

《International Journal of Applied Earth Observation and Geoinformation》2020

Reliable quantification of savanna vegetation structure is critical for accurate carbon accounting and biodiversity assessment under changing climate and land-use conditions. Inventories of fine-scale vegetation structural attributes are typically conducted from field-based plots or transects, while large-area monitoring relies on a combination of airborne and satellite remote sensing. Both of these approaches have their strengths and limitations, but terrestrial laser scanning (TLS) has emerged as the benchmark for vegetation structural parameterization – recording and quantifying 3D structural detail that is not possible from manual field-based or airborne/spaceborne methods. However, traditional TLS approaches suffer from similar spatial constraints as field-based inventories. Given their small areal coverage, standard TLS plots may fail to capture the heterogeneity of landscapes in which they are embedded. Here we test the potential of long-range (>2000 m) terrestrial laser scanning (LR-TLS) to provide rapid and robust assessment of savanna vegetation 3D structure at hillslope scales. We used LR-TLS to sample entire savanna hillslopes from topographic vantage points and collected coincident plot-scale (1 ha) TLS scans at increasing distances from the LR-TLS station. We merged multiple TLS scans at the plot scale to provide the reference structure, and evaluated how 3D metrics derived from LR-TLS deviated from this baseline with increasing distance. Our results show that despite diluted point density and increased beam divergence with distance, LR-TLS can reliably characterize tree height (RMSE = 0.25–1.45 m) and canopy cover (RMSE = 5.67–15.91%) at distances of up to 500 m in open savanna woodlands. When aggregated to the same sampling grain as leading spaceborne vegetation products (10–30 m), our findings show potential for LR-TLS to play a key role in constraining satellite-based structural estimates in savannas over larger areas than traditional TLS sampling can provide.  相似文献   

On the equivalence of two methods for computing partial derivatives of seismic waveforms—II. Laterally homogeneous initial model     

Robert J. Geller  Tatsuhiko Hara  Seiji Tsuboi 《Geophysical Journal International》1990,102(2):499-502

  相似文献   

Waveform Shaping of Sonar Transducers for Improving the Vertical Resolution in Sub-bottom Sediments Profiling     

P. Cobo  C. Ranz  A. Fernández  M. Cuesta  D.K. Anthony  M. Siguero 《Marine Geophysical Researches》2005,26(2-4):87-95

Vertical resolution is of fundamental importance in sonar exploration and is directly related to the duration of the acoustic pulse generated by the transducer. The shorter the radiated pulse, the higher the vertical resolution. Many sub-bottom profiling sonar systems use piezoelectric transducers because they are reversible and well understood. Piezoelectric projectors are normally resonant transducers, which are intrinsically narrowband. A piezoelectric transducer is usually driven by a tone-burst. However, it is possible to use Fourier techniques to find a pre-compensated electrical driving function so that the transducer radiates a prescribed wider band acoustic waveform. This technique can be applied to synthesize zero-phase cosine-magnitude, Gaussian, and bionic pulses, with a conventional sandwich transducer. Zero-phase cosine-magnitude waveforms provide minimum length pulses (and therefore maximum resolution) within a prescribed frequency band.The aim of this paper is to illustrate the synthesis of wideband acoustic pulses using an underwater piezoelectric projector. The conventional acoustic waveform radiated when a Tonpiltz transducer is transiently excited using a “click” and allows its frequency response function to be measured. This function is used to design the electrical signal which then drives the transducer so that it radiates the shortest pulse compatible with its mechanical response. The significant resolution enhancement of the waveform shaping process is illustrated by its application to a sediment wedge model.  相似文献   

Estimation of Sea Ice Thickness from SARAL/AltiKa in Drifting Orbit Phase     

Purvee Joshi  Sandip R. Oza  Ujjwal K. Gupta  Shailendra Saini  D. Ram Rajak  I. M. Bahuguna 《Marine Geodesy》2020,43(3):302-323

Abstract

Intra and inter-annual variations in the sea ice thickness are highly sensitive indicators of climatic variations undergoing in the earth’s atmosphere and oceans. This paper describes the method of estimating sea ice thickness using radar waveforms data acquired by SARAL/Altika mission during its drifting orbit phase from July 2016 onwards yielding spatially dense data coverage. Based on statistical analysis of return echoes, classification of the surface has been carried out in three different types, viz. floe, lead and mixed. Time delay correction methods were suitably selected and implemented to make corrections in altimetric range measurements and thereby freeboard. By assuming hydrostatic equilibrium, freeboard data were converted into sea ice thickness. Results show that sea ice thickness varies from 4 to 5?m near ice shelves and 1 to 2.5?m in the marginal sea ice regions. Freeboard and sea ice thickness estimates were also validated using NASA’s Operation Ice Bridge (OIB) datasets. Freeboard measurements show very high correlation (0.97) having RMSE of 0.13. Overestimation of approximately 1–2?m observed in the sea ice thickness, which could be attributed to distance between AltiKa footprint and OIB locations. Moreover, sensitivity analysis shows that snow depth and snow density over sea ice play crucial role in the estimation of sea ice thickness.  相似文献   

神舟四号高度计波形数据预处理和信息提取   总被引：1，自引：0，他引：1  

纪永刚  张杰  张有广  孟俊敏 《海洋与湖沼》2007,38(6):487-494

神舟四号(SZ-4)高度计在国内首次提供了星载雷达高度计回波波形数据.本文中作者分析了SZ-4高度计回波波形的特点,完成波形数据的预处理,并在此基础上完成初步的信息提取.在数据预处理方面,通过SZ-4高度计水陆边界处波形的特点,提出了波形最大幅度控制的方法,筛选回波波形.在波形归一化处理过程中,发现SZ-4高度计波形中存在双峰现象,并指出第二个峰为异常波形区.在波形信息提取方面,利用波形重新跟踪得到的半功率点计算出SZ-4高度计高度跟踪补偿误差,并根据高度计天线指向角和回波波形下降沿斜率之间的关系,从波形后沿提取天线指向角信息.分析结果表明,SZ-4高度计天线指向比较平稳,而跟踪补偿由于变化较大,在计算海面高度时,应作为一项误差源被考虑到.  相似文献   

激光雷达技术在我国地形测图中应用前景广阔     

宫鹏  ;黄华兵 《测绘软科学研究》2008,(6):45-48

激光雷达技术（Light Detection and Ranging,LiDAR）是近十年来快速发展并得到广泛应用的测量手段。美国地质调查局（USGS）、美国国家宇航局（NASA）以及美国地质学会（AASG）已经开始讨论建设全美高分辨率激光雷达数据库。我国正处于东部城市化、土地利用巨变、西部无图而经济高速发展的时期,国家、地方、企业生产单位迫切需要现实性强、精确度高、比例尺大的地形数据产品。满足这些要求的主要途径是采用激光雷达这一先进的测绘技术。我们建议国家、地方与企业统筹规划,各司其职,努力建设我国的激光雷达基础数据库。本文通过Stoker等（2008）介绍的第二届全美激光雷达战略研讨会上论述的激光雷达技术特点、激光雷达数据的科学需求与应用以及商业化运作问题,结合我国目前的激光雷达发展趋势、测绘数据需求以及土地利用变化监测等科学问题,简析激光雷达技术在我国的应用前景。  相似文献